MIL-STD-1310
2-MHz Pulser
Model Number: PG-2MHz-1
The APELC 2-MHz Pulser is a battery-powered pulse generator for pulsed-current-injection testing per MIL-STD-1310. The pulse generator produces a 2 MHz damped-sinusoid waveform with a quality factor of ~10 when connected to the CPLR-10-2MHz coupler via a 12-foot coaxial cable.
The system utilizes a removable COTS-rechargeable battery and can deliver over 2,000 shots per battery and remain in standby for more than 10 hours. The pulser displays and push button controls are brightly lit for ease of use and the analog voltage control allows for smooth continuous output voltage adjustment throughout the operating range. This unit is extremely field portable with setup and operation that is straight forward with COTS Type N hardware and cables.
CHARACTERISTICS
The unit is housed in a weatherized and extremely durable iM2075 Pelican™ case with a handle and attachments for a shoulder strap.
PRODUCT OVERVIEW
The following items are included with the PG-2MHz-1:
- Rechargeable battery and charging stand
- Shoulder strap
- 12-foot coaxial cable with N-Type connectors
- 1-year warranty (extended warranty options listed below)
- Operator and Safety Manual
- Calibration loop
The following items are required for proper implementation of the PG-2MHz-1:
- A CPLR-10A-2MHz “clam-shell” type coupler, specifically matched for use with the PG-2MHz-1
- 12-foot coaxial cable
Specification | Value | Unit |
---|---|---|
Center Frequency | 2 | MHz |
Peak Amplitude (onto calibration loop) | 10 | A |
Waveform Type | Damped-Sinusoid | N/A |
Quality Factor (Q) | 10 (+/- 2) | N/A |
Repetition Rate | Single-shot | N/A |
Approximate Size | 9.50 x 7.50 x 7.25 | Inches |
Approximate weight | 10 | lbs |
HIGH-VOLTAGE COMPONENT ADD-ONS
APELC’s selection of add-on features for high-voltage components are designed to increase safety and usability.
CONNECTORS
Rugged high-voltage quick disconnect cable connectors for voltages up to 700 kV.
DIAGNOSTICS
Integrated high-speed current diagnostics in high-voltage quick disconnects.
SOFTWARE
Software to increase user safety and reduce time spent in testing.
TERMINATION
Termination and monitoring capability for a high-voltage, high-power pulse without radiating equipment.
TRIGGER GENERATORS
Providing the trigger pulse to a Marx Generator through a pulse forming circuit.
POWER & CONTROL RACKS
Fully integrated power and control units to deliver a turnkey package for our pulsed power systems.
REQUEST A QUOTE
For more information or to discuss a custom or turnkey system, complete the form below and we will contact you within 24 hours.