Part Number: MG17-1C-940PF
Nearly identical to APELC’s MG-1C-500PF Marx Generator, the MG17-1C-940PF uses a larger stage capacitor for slightly more energy. This 17-stage Marx Generator is designed primarily for the direct generation of RF. It does this via connection of the generator to the antenna, through a high-voltage coaxial cable.
With a ~200 ps rise-time, this generator is well-suited for shock-exciting a variety of antenna geometries, including TEM horns, helical antennas, monopoles and dipoles. It is capable of delivering 255 kV into a matched load, or as much as 510 kV into an open-circuit. The generator is designed to deliver 7 J per pulse and has an impedance of approximately 116 Ohm, resulting in a maximum peak power of approximately 600 MW.
- Maximum open-circuit voltage: 510 kV
- Maximum peak voltage into matched load: 255 kV
- Maximum repetition rate: 10 Hz
- Peak power (matched load): 600 MW
- Energy per pulse: 7 J
- Pulse rise-time: 200 ps
The following items are included with this Marx generator:
- Marx Generator
- High-voltage cable with quick connect
- High-voltage power supply cable with quick connect
- High-voltage trigger cable with quick connect
- Two additional stages
The following item is required for proper implementation of this Marx Generator:
- High-voltage, constant voltage power supply
- High-voltage trigger unit
- Pressurized breathable dry air source
|N||Number of Marx Generator stages||17||–|
|Epulse||Maximum Marx energy per pulse||7||J|
|Pmax||Peak power to a matched load||560||MW|
|Vch||Marx maximum charge voltage||30||kV|
|VE||Peak Erected voltage||510||kV|
|Cstage||Capacitance per Marx stage||500||pF|
|L||Marx Generator Length||42||In|
|D||Marx Generator Diameter||3||In|
|PRFmax||Maximum Burst-Mode PRF||10||Hz|
HIGH-VOLTAGE COMPONENT ADD-ONS
APELC’s selection of add-on features for high-voltage components are designed to increase safety and usability.
Rugged high-voltage quick disconnect cable connectors for voltages up to 700 kV.
Integrated high-speed current diagnostics in high-voltage quick disconnects.
Software to increase user safety and reduce time spent in testing.
Termination and monitoring capability for a high-voltage, high-power pulse without radiating equipment.
Providing the trigger pulse to a Marx Generator through a pulse forming circuit.
POWER & CONTROL RACKS
Fully integrated power and control units to deliver a turnkey package for our pulsed power systems.
REQUEST A QUOTE
For more information or to discuss a custom or turnkey system, complete the form below and we will contact you within 24 hours.