Part Number: MG16-3C-2700PF
The MG16-3C-27000 Marx Generator is specifically developed for high-powered RF applications. Delivering nearly 4.5 GW of peak power into a matched resistive load, it is capable of operating with a burst-mode repetition rate of 100 Hz and delivering an average power of 10 kJ/s.
With a rise-time of less than 20 ns, and significant erected energy, this generator is well-suited for driving the type of pulse conditioning circuits typically used for producing high-powered RF.
- Maximum open-circuit voltage: 640 kV
- Maximum peak voltage into matched load: 320 kV
- Maximum repetition rate: 100 Hz
- Peak power (matched load): 4.45 GW
- Energy per pulse: 100 J
- Pulse rise-time: ~15 ns
The following items are included with this Marx generator:
- Marx Generator
- High-voltage cable with quick connect
- High-voltage power supply cable with quick connect
- High-voltage trigger cable with quick connect
- Two additional stages
The following item is required for proper implementation of this Marx Generator:
- High-voltage capacitor charging power supply
- High-voltage trigger unit
- Pressurized breathable dry air source
|N||Number of Marx Generator stages||16||–|
|Epulse||Maximum Marx energy per pulse||100||J|
|Pmax||Peak power to a matched load||4.45||GW|
|Vch||Marx maximum charge voltage||40||kV|
|VE||Peak Erected voltage||640||kV|
|Cstage||Capacitance per Marx stage||8,100||pF|
|L||Marx Generator Length||42||In.|
|D||Marx Generator Diameter||8||In.|
|PRFmax||Maximum Burst-Mode PRF||100||Hz|
HIGH-VOLTAGE COMPONENT ADD-ONS
APELC’s selection of add-on features for high-voltage components are designed to increase safety and usability.
Rugged high-voltage quick disconnect cable connectors for voltages up to 700kV.
Integrated high-speed current diagnostics in high-voltage quick disconnects.
Software to increase user safety and reduce time spent in testing.
Termination and monitoring capability for a high-voltage, high-power pulse without radiating equipment.
Providing the trigger pulse to a Marx generator through a pulse forming circuit.
POWER & CONTROL RACKS
Fully integrated power and control units to deliver a turn-key package for our pulsed power systems.
REQUEST A QUOTE
For more information or to discuss a custom or turnkey system, complete the form below and we will contact you within 24 hours.