Home » Marx Generators » MG40-3C-2700PF

Marx Generator

MG40-3C-2700PF

Part Number: MG40-3C-2700PF

The APELC MG40-3C-2700PF is a megavolt-class Marx Generator that was originally designed to drive an integrated flash X-ray diode.

With a maximum 40 kV charge voltage, this generator has an open-circuit voltage of 1.6 MV, and can deliver 800 kV into a matched load (70 Ohms), or 670 kV into a 50 Ohm load. This generator has a maximum pulse energy of 260 J and is capable of delivering more than 10 GW of peak power.

CHARACTERISTICS

  • Maximum open-circuit voltage: 1.6 MV
  • Maximum peak voltage into matched load: 800 kV
  • Maximum repetition rate: 10 Hz
  • Peak power (matched load):  10 GW
  • Energy per pulse: 260 J
  • Pulse rise-time: ~5 ns

PRODUCT OVERVIEW

The following items are included with this Marx Generator:

  • Marx Generator
  • High-voltage cable with quick connect
  • High-voltage power supply cable with quick connect
  • High-voltage trigger cable with quick connect
  • Two additional stages

The following item is required for proper implementation of this Marx Generator:

  • High-voltage capacitor charging power supply
  • High-voltage trigger unit
  • Pressurized breathable dry air source
Parameter Description Value Unit
N Number of Marx Generator stages 40
Epulse Maximum Marx energy per pulse 260 J
Pmax Peak power to a matched load 9 GW
Vch Marx maximum charge voltage 40 kV
VE Peak Erected voltage 1600 kV
Cstage Capacitance per Marx stage 8.1 nF
CE Erected capacitance 200 pF
Le Series Inductance 1 uH
Zm Marx Impedance 70 Ohm
L Marx Generator Length 72 In.
D Marx Generator Diameter 8.5 In.
PRFmax Maximum Burst-Mode PRF 10 Hz

HIGH-VOLTAGE COMPONENT ADD-ONS

APELC’s selection of add-on features for high-voltage components are designed to increase safety and usability.

CONNECTORS

Rugged high-voltage quick disconnect cable connectors for voltages up to 700 kV.

DIAGNOSTICS

Integrated high-speed current diagnostics in high-voltage quick disconnects.

SOFTWARE

Software to increase user safety and reduce time spent in testing.

TERMINATION

Termination and monitoring capability for a high-voltage, high-power pulse without radiating equipment.

TRIGGER GENERATORS

Providing the trigger pulse to a Marx Generator through a pulse forming circuit.

POWER & CONTROL RACKS

Fully integrated power and control units to deliver a turnkey package for our pulsed power systems.

REQUEST A QUOTE

For more information or to discuss a custom or turnkey system, complete the form below and we will contact you within 24 hours.

Start typing and press Enter to search